Cast Molding Service

 Low-Volume Production

Advanced Prototyping

Market Testing

aluminium mould casting refers to the processing process in which liquid raw materials are poured into a mold and cooled and solidified at room temperature.

 

Zhongde has many years of casting experience. Our experienced engineers can accurately analyze whether the product is suitable for casting products according to the product structure.

Advantages of Cast Molding

 

Low-volume production

 

High accurate production

 

A wide variety of finish options

 

Rapid turnaround on parts

 

Durability for maximum wear and strength

Cast Molding Capabilities

 

Name

Description

Rapid tooling

Mold working life time up to 20,000 runs. Short machined time.

Production tooling

Traditional molds, used for mass production

Multi cavities moulds

Moulds can produce more than one part per cycle, used to increase production rate.

Family moulds

Moulds produce two or more different parts per injection cycle, the parts should be of the same material and color.

Name

Description

Mold Material

Steel P20, H13, S136, 2316, 2344, 083,718H, SKD618, etc.

Mold Type

Family molds, single and multi-cavities molds

Mold Storage

3 years inactivity

Guaranteed Mold Life

Unlimited

Mold Remachining

We can remachine the molds if there are any changes required, basis on mold structure

Mold Warranty

Lifetime warranty on production molds

Maximum Dimensions

2500mm*2000mm

 

Cast Molds Service

 

 

Guideline of Cast Molding

 

Size of Cast Molding

 

The below table shows the size of Casting Molding parts we usually make. If you need a larger size, we can also help you achieve it.

 

Size

Metric

Inch

Length

2500

98.4

Width

2000

78.7

 

Available material of Cast Molding

 

PU | Polyurethane

 

MC Nylon

 

LSR | Liquid Silicone Rubber

 

Surface finishing of Cast Molding

 

Painting

 

Inserts

 

Silk screening

 

Custom processes

 

Transparent parts

 

PMS color matching

 

Founded in 1978, Zhongde is one of the most professional cast urethane manufacturers. We provide metal casting with 3d printed molds, compression molding service, CNC machining service and etc. Want to know the urethane casting cost? Please contact us.


评论

发表评论

此博客中的热门博文

What are all the design guidelines required to develop a plastic part?

图片
  The structural design of plastic product development should follow the following principles:   a. The structure design should be reasonable: the assembly gap is reasonable, and all plug-in structures should be reserved for gaps; ensure sufficient strength and rigidity (safety test), and properly design a reasonable safety factor.   b. The structural design of plastic parts should comprehensively consider the manufacturability of the mold, and simplify the manufacturing of the mold as much as possible.   c. The plasticity of the structure of plastic parts should be considered, that is, the injection molding production efficiency of the custom plastic injection molding companies should be high, and the rejection rate of injection molding should be minimized.   d.  Consider facilitating assembly production (especially not conflicting with assembly).   e. The structure of stamping plastic parts adopts standard and mature structure as much as possible, so...
阅读全文

Something you need to know about stamping mould

图片
Oct 10-2020 Views: 638 1. What is the effect of the deep sill (drawing rib) in the cover mold? The effects of the deep drawing threshold (drawing bead) are as follows: 1. Increase the friction resistance of the feed material, so that the surface of the deep drawing part bears sufficient tensile stress, improve the bending stiffness of the deep drawing part and reduce the concave surface, distortion, slack and wave pattern caused by the resilience; 2. Adjust the fluidity of the material to make the fluidity and frictional resistance of each part of the whole drawing process equal, or make the amount of material injected into the mold suitable for each part of the steel part to avoid the situation of "less wrinkles, less cracks"; 3. Expand the scope of adjustment of the hemming force. On the double-action punching machine, adjusting the height of the four corners of the outer guide rail slider only roughly adjusts the hemming force, and it is not possible to control t...
阅读全文

Choose the Right Finish for Your Material

图片
  Different surface finishing engineering  can be applied to different materials. Find below a quick cheat sheet of surface finish and material compatibility.   Name Material Compatibility Smoothing All plastics and metals Bead blasting All metals Powder coating All metals Anodizing clear (type II) Aluminum alloys Anodizing color (type II) Aluminum alloys Anodizing hard coat (type III) Aluminum alloys Electropolishing All metals Black oxide Stainless steel and copper alloys Chromate conversion coating Aluminum and Copper alloys Brushing All metals     Our Surface Finishes   Here is a list of optional surface finishes. For custom surface finishes such as electroplating or polishing, please contact sales@zdcpu.com.   As Machined For as machined all sharp edges are removed and parts are deburred. Tool marks are visible.   Smoothing A finishing CNC machining operation can be applied to the part to reduce its surface roughness. Machine marks are less e...
阅读全文